Remove The Shipping Retainers - Oki MICROLINE ML521 User Manual

2. Lift up on the ridged area at either end of the carriage
cover.
3. Peel the clear protective film from the access cover.
4. Press the carriage cover back into place.
E-2 Section 1

Remove The Shipping Retainers

1. Open the access cover (
either end and lifting, then remove the printhead
shipping retainer ( ) , leaving the cover open for
Ë
installation of the ribbon.
Ê
2. Grasp the front edge of the paper separator (
pull it up.
) by grasping the tabs at
Ê
Ë
) and
Ì
Ì