Control Panel Buttons: Print Mode
Press to select (SEL glows)/deselect printer.
Press to reset paper alarm (ALARM glows).
Press to end printer tests.
Press with SHIFT to enter Menu mode.
SEL
SEL
MENU
SHIFT
EXIT
POWER
ALARM
Used with other buttons to set TOF.
Press with SEL to enter Menu mode.
E-20 Section 3
Moves continuous-form paper up for
tear-off or back down for printing.
Press to move paper up a line.
Hold for repetitive line feeds.
Hold on power up to start Font test.
LF
TEAR
FF/LOAD
Micro Feed
Micro Feed
Down
Up
GROUP
ITEM
SET
MENU
Retracts continuous-form paper from path.
Press to load/eject single sheet, or to move continuous-form paper to print position.
Printer deselected: press with SHIFT to move TOF down.
Press to turn Quite mode On (light glows) and Off.
Printer deselected and no paper loaded: press with
SHIFT button to reset TOF to default
Hold on power up to start Rolling ASCII Test.
PRINT QUALITY
PARK
QUIET
CHARACTER PITCH
TOF
PRINT
RESET
Press to set print quality, indicated
by lights (HSD, UTILITY, NLQ).
HSD
NLQ
UTILITY
10
12
15
17
20
PROP
Press to set character pitch, indicated
by lights (10, 12, 15, 17, 20, PROP).