SELECTING THE CONTROL PANEL LANGUAGE
English is the default language for all error and status messages;
however, these messages are also available in many languages. Use
the following procedure to change the display language.
Refer to the section
for a brief overview of the control panel and its menus and sub-menus.
1.
Press the <MENU> button to display the Menu screen.
2.
Press the < > or < > button until [Display Language] is
displayed, then press the < > button.
3.
Press the < > or < > button until the required language is
displayed, then press the <FEED/SELECT> button.
4.
Press the <MENU> button to complete the language setting.
NOTE
"The Control Panel and Menu system" on page 43
INSTALLATION AND RELOCATION PROCEDURE > 45