In case of doubts about the safety of the machine, do not use it. DESCRIPTION The pump YAK-01 is a powerful unit fitted with high performance pump. Particularly recommended for difficult descaling treatments, they work in complete safety and autonomy enabling the operator to carry out other works at the same time.
The pumps are in conformity with the following European Directives, Laws and Regulations: Machinery Directive 2006/42/EC QUALITY KAMMAK equipments are manufactured with high-quality acid-resistant materials and submitted to severe operating tests. Follow these instructions to avoid any operating and servicing problems.
3 - TECHNICAL FEATURES YAK-01 Motor 220 V - 650W / 0.8 HP Max working pressure 4 Bar Degree of protection IPX4 Max. temperature 60° C Flow rate 63* l/min. Head 60m* Fittings 3/4” Tank capacity 30 l Dimensions HxWxD...
- Switch on the pump and clean the system. The YAK-01 has 1 x 250 cm Pressure Line and 1 x 250 cm Return Line hoses fitted with 3/4” brass hose connectors at the out board end and 3/4” fittings at the inboard end.
The warranty is valid only if the equipments have been installed, used and properly maintained accor- ding to all directions supplied by KAMMAK in the instructions manual attached to the equipment. Should any conformity defects of the product be found during the warranty period, the Customer shall notify the Dealer to agree upon the terms of repairing and/or replacing of the product.