Changing The Display Language; Printing Menu Settings - Oki B4200 User Manual

about the B4300 printer. Note, however, that the RS232 Menu and
Network Menu do not apply to the B4200 printer.

CHANGING THE DISPLAY LANGUAGE

Carry out the following instructions to change the language that is
displayed in the Status Monitor.
1. Start the Status Monitor.
2. Select the Printer Setup tab.
3. On the Maintenance 2 tab, select the required language in the
[Language] dropdown menu.
4. Click [OK].

PRINTING MENU SETTINGS

The menu settings can be printed as a menu map as follows.
Using the control button
1. Press the control button to take the printer off-line.
2. Press and hold down the control button for at least two seconds,
but less than five seconds.
3. The printer prints a list of the menu settings and a demo print
page.
Demo and menu pages can also be printed using the printer Status Monitor.
NOTE
OPERATOR PANELS > 22