Advertisement
Control Panel & Remote
WARNING: FAILURE TO FOLLOW THESE OPERATING INSTRUCTIONS MAY
RESULT IN INJURY AND/OR DAMAGE.
NOTE: The Remote Control is packaged in a red box. The battery is also stored in this
box and must be installed in the remote control before operation.
CAUTION: The remote handset requires a button cell battery (CR2032) to operate.
This is supplied in a small zip bag with the handset.
Fig. 4
Remote
A
B
F
H
C
Controls
2
1
1. Locate the battery compartment on the back
of the handset.
2. Remove the screw using a Philips screwdriver
from the battery compartment door (keeping
D
it safe to be refitted later).
3. Remove the battery compartment door. In-
E
sert the CR2032 battery ensuring it is installed
J
the correct orientation.
4. Replace the battery compartment door and
G
refit and tighten the screw. Do not over tight-
en. The use of this screw is intended to add
extra child protection to your handset.
Fig. 5
3
4
5
6
11
Advertisement
