HP E3800-24G-2SFP+ Installation And Getting Started Manual page 107

installation stacking cable ... 2-14
IP address
configuring ... 3-3
required for networked management
sessions ... 3-1
L
LED
stacking module ... 2-9
LEDs
Act ... 1-9
behavior during switch boot ... 2-7
blinking definition ... 1-10–1-11
checking during troubleshooting ... 5-12
error indications ... 5-4
fan status ... 1-10
Fault
behavior during self test ... 2-7
showing error conditions ... 5-4
fault ... 1-8
FDx ... 1-9
Link ... 1-9, 1-16
location on switch ... 1-2
Mode ... 1-9
Mode LED View select indicators ... 1-9, 1-11
on switch ... 1-8
PoE ... 1-9
port
description ... 1-9
Port View
selecting the display ... 1-12
Power ... 1-8
behavior during self test ... 2-7
Spd ... 1-9
stacking related ... 1-11
switch
descriptions of ... 1-8
Switch Boot
behavior during switch boot ... 2-7
Test ... 1-8
TMP Status ... 1-10
Usr ... 1-9
Link LEDs ... 1-9, 1-16
link test ... 5-13
location for the switch, considerations ... 2-5
M
MDI-X to MDI network cable ... B-7, B-9
MDI-X to MDI-X network cable ... B-8
mesh
stacking topology ... 2-27
Mode LEDs ... 1-9
module
install or remove ... 2-8
module slot ... 1-14
mounting the switch
in a rack or cabinet ... 2-10
precautions ... 2-4
on a horizontal surface ... 2-13
N
network cables
Auto-MDIX feature ... B-6
required types ... 2-5
twisted pair, wiring rules ... B-6
twisted-pair connector pin-outs ... B-6
network devices
connecting to the switch ... 2-21
network ports
connecting to ... 2-21
location on switch ... 1-6
types of ... 1-6
non-standard network cables, effects ... 5-2
O
out-of-band
console connection required to configure IP
address ... 2-20, 3-1
direct connection through console port ... 2-18–
2-19
for switch management ... 3-1
networked connection through management
port ... 3-5
out-of-band console access ... 3-6
P
parts, included with the switch ... 2-1
password
configuring ... 3-3
passwords, deleting ... 1-13
Ping test ... 5-13
Index – 3