Table of Contents
Advertisement
5.2.3 Admin passcode management
Click "
" (figure 2-1)
→ Basics
→ See Admin Unlock Code as shown in Figure 2-2
→ Key in the opening code on the lock's number plate, followed by "#" to unlock.
5.2.4 e-Key management
Click "
" as in picture 2-1 →picture 2-3 shows how the eKey is sent.
After the Owner has added the lock to the APP, the Owner will have the highest authority in the lock.
The owner can send eKeys to other users of TTLock, set time limits, permanent or one-time Bluetooth
eKey rights. An Admin can handle all their own exhibited eKeys, including removing these, restoring,
sending, changing the validity period and viewing the history of these. For eKeys whose validity is about
to expire, the number of remaining days is displayed in yellow and a reminder in red.
5.2.5 Passcode management
Click "
"
→Figure 2-4. All generated Passcodes can be viewed and managed here. This includes code change,
deletion, restore and history.
5.2.5.1 Passage mode (Under settings)
→Enable passage mode in the APP by dragging the slider to the right.
→Set the desired day / days.
→If all hours are desired, this is activated by dragging the slider to the right.
→If a start and end time is desired, enter this.
→Don't forget to press "Save" at the top right of the screen.
→To temporarily cancel pass mode, press and hold "#" until the lock locks.
The next time you open with authorization, the lock returns to passage mode (if passage mode is still
set to active).
When the lock is programmed for passage mode, the color of the lock's name in the main menu
changes. This is to remind that the lock is programmed for passage mode.
20
5.2.6 Unlock records
Click "
"as shown on 2-1
→fig 2-5 You can query your unlock records as shown.
2-1
2-2
2-4
2-5
2-3
21
Advertisement
Table of Contents
