Release Notes for the CMTS 1000
PREINSTALLATION CONFIGURATION
It is possible to communicate with the CMTS 1000 using any standard
terminal program (i.e., the Terminal.exe with Win3.1 or Win95). It is also
possible to use HyperTerminal with Win95 and Win98. The following
connection settings are required to communicate with the CMTS 1000. You
need a 9-to-9 pin null modem cable for connection.
Settings
•
•
•
•
•
•
Emulation
•
Miscellaneous
•
•
•
1-2
Com Port
Baud
Data Bits
Stop Bits
Parity
Flow Control
VT100
Function, arrow, and Ctrl keys as terminal keys
Append LF (line feed) to incoming line ends
Follow the CMTS installation procedure from the CMTS Installation
Manual referenced in the Associated Documents section of this
manual.
=
COM 1 or COM 2
=
9600
=
8
=
1
=
none
=
none (off)
305472-B Rev 02