Advertisement
C
ONTENTS
Prepare a Location for the CM 100
Check Equipment and System Requirements
Install Ethernet Twisted Pair Cable and Cable TV Coaxial Cable
Install External Power Supply and Power Cord
Description of Diagnostic LEDs and CM 100 Power Up Sequence
Troubleshooting Checklist
If you Still Need Help
Prepare a Location for the CM 100
Your location requirements are:
• A sturdy, level surface for placement
• A well ventilated room
• A stable environment with no abrupt temperature or humidity changes
• No exposure to chemicals or direct sunlight
302694-C Rev 00
3"
Overhead View
CM 100 Lying Flat
Getting Started with the CM 100 V2.0
1
Advertisement
