Advertisement
Quick Links
Advertisement
Related Manuals for Bay Networks CM 100
Summary of Contents for Bay Networks CM 100
- Page 1 Getting Started with the CM 100...
- Page 3 Getting Started with the CM 100 Copyright © 1999 Bay Networks All rights reserved. Printed in the USA. The information in this document is subject to change without notice. The statements, configurations, technical data, and recommendations in this document are believed to be accurate and reliable, but are presented without express or implied warranty.
- Page 4 Note: The CM 100 must be operated with the supplied line cord or with a line cord meeting IEC227 H03 VV-F or IEC227 H03 VVH2-F having conductors with a cross sectional area not less than .75 mm 302694-C Rev 00...
- Page 5 Getting Started with the CM 100 V2.0 IMPORTANT SAFETY INSTRUCTIONS Read Instructions - All the safety and operating instructions should be read before the product is operated. Retain Instructions - The safety and operating instructions should be retained for future reference.
- Page 6 Règlement sur le brouillage radioélectrique du ministère des Communications Cet appareil numérique (CM 100) respecte les limites de bruits radioélectriques visant les appareils numériques de Classe B prescrites dans le Règlement sur le brouillage radioélectrique du Ministère des Communications du Canada.
- Page 7 Check Equipment and System Requirements Install Ethernet Twisted Pair Cable and Cable TV Coaxial Cable Install External Power Supply and Power Cord Description of Diagnostic LEDs and CM 100 Power Up Sequence Troubleshooting Checklist If you Still Need Help Prepare a Location for the CM 100 Your location requirements are: •...
- Page 8 Check Equipment and System Requirements Locate each item in the list below: CM 100 User Guide (Getting Started with the CM 100) CM 100 Power Supply CM 100 Power Supply Power Cord (Domestic Only) Cable TV Drop Cable (Provided by Cable Operator)
- Page 9 Plug one end of the 10Base-T Twisted Pair cable in the PC Ethernet card’s RJ-45 modular jack Plug the other end of the 10Base-T Twisted Pair cable in the CM 100’s RJ-45 modular jack Attach the cable TV “Drop” cable to the CM 100’s “F” connector...
- Page 10 Prepare CM 100 to Receive Power as follows: DO NOT CONNECT TO THE POWER OUTLET YET Connect the External Power supply’s 5-Pin DIN Plug to the CM 100’s 5-Pin DIN power receptacle Connect the CM 100 External Power Supply’s power cord to the Power Supply...
- Page 11 Power Up LED Monitoring Procedure: PLEASE REVIEW POWER UP SEQUENCE BEFORE YOU CONNECT The CM 100 goes through the following sequence when it’s connected to a properly rated power outlet using its supplied power supply and power cord: CM 100 State...
-
Page 12: Troubleshooting Checklist
What to Do In Case of Problems Verify that your computer’s Ethernet connection is valid (Link LED on solid) Verify with your cable operator that your CM 100’s labeled information is entered in their database Verify with your cable operator that the supporting Data Over Cable TV headend... - Page 14 Printed in U.S.A...