ADTRAN DSU IV ESP User Manual page 3

ABOUT THIS MANUAL
This manual is arranged so you can quickly and easily find the information you
need. The following is an overview of the contents of this manual:
• Chapter 1, Introduction, familiarizes you with DDS, Switched 56, SNMP, and
TELNET. This chapter also includes DSU IV highlights and describes the options
that may be purchased for use with the DSU.
• Chapter 2, Installation, describes the DSU connectors (pin assignments are given in
Appendix A) and provides an installation diagram.
• Chapter 3, Operation, explains how to operate your DSU using either the front
panel or a VT 100 terminal interface.
• Chapter 4, Applications, provides examples of some common DSU applications,
including network diagrams.
• Chapter 5, Configuration Overview, explains how to access the DSU configuration
menu, including information on the different configuration methods. This chapter
also provides a front panel menu tree.
• Chapters 6 through 11 provide brief explanations for selections made in the Con-
figuration menus. These chapters are based on the front panel menu branches of
the Configuration menu: Network Options, DTE Options, Test Options, Dial
Options, Management, and Utilities.
• Chapter 12, Testing and Troubleshooting, describes the testing options available
with the DSU IV and gives troubleshooting information.
• Chapter 13, Activating Dial Functions, describes the Dial options available from the
Main menu.
• Chapter 14, Viewing Status Information, provides information on the status menus
available for the base unit as well as the DBU cards.
• Appendix A provides pinouts for the connectors of the DSU and the DBU and
Ethernet cards.
• Appendix B shows the AT commands available for the DSU.
• Appendix C describes the terminal menu interface (accessed through a VT 100
terminal or a TELNET session).