Bu Adjustment Flow [Yy] - Sony Blu-ray Disc BDP-S2200 Service Manual

1-1-5. BU Adjustment Flow [yy] ~

Remove the defective BU from Loading
Assy and also remove BU insulator (4pcs)
Unpack new BU and take OP Data Barcode
Assemble BU with Insulators to Loading
Decode the OP Data Barcode photo using
BDPRdec.exe and save the test data to
USB memory
Enter Service Mode and insert USB memory
And confi rm dIOP by select [7] OP Check
IOP in specifi cation --> Turn AC Power OFF
Turn Power ON and check playback
performance using BD, DVD and CD
Optical Block Unit (BU) OP Data Write Flow (yy) ~ [After BU/MB Replacement]
photo by camera
As sy (tighten screw wi th 2kgf)
(File Name: BuData.txt)
to USB connector
Select [8] Drive -->
Selec t [1] Drive OP data W rite -->
Select mode : 1 or 2
Press ENT ER
After Finishing ReWrite OP data
--> Turn AC Power OFF
Menu to verify IOP in specifi cation
The following cases need OP Data Write:
(1) Replace BU (MB is original)
(2) Replace MB (BU is original)
(3) Replace b oth BU and MB
JIG req uirement
Digitalcamera (with macro mode)
Barcode decoder (BDPRdec.exe)
installed in jig
PC's (jig purpose)
USB memory
ESD free work bench
Explanation :
Mode 1 : BDV set
Mode 2 : BDP set
DVD: HLX-513
BLX-104
CD: HLX-A1
1-3
BDP-S2200