Using Your Toothbrush - Braun Oral-B D700 Manual

Table of Contents

Advertisement

Available languages

Available languages

• Clean brush head properly after each use (see «Cleaning recom-
mendations» paragraph). Proper cleaning ensures the safe use
and functional life of the toothbrush.
Important Information
• Your Oral-B toothbrush can be used with your smartphone (find
details under «Connecting your toothbrush to your Smartphone»).
• To avoid electromagnetic interference and/or compatibility con-
flicts, deactivate Bluetooth on your toothbrush handle (5)
before using it in restricted surroundings, such as aircrafts or
specially marked areas in hospitals.
• Deactivate Bluetooth by simultaneously pressing the on/off (3)
and mode button (4) for 2 seconds until the Bluetooth indicator
(6) goes off. Follow the same procedure to reactivate Bluetooth
again.
• Persons with pacemakers should always keep the toothbrush
more than six inches (15 centimeters) from the pacemaker while
turned on. Anytime you suspect interference is taking place,
deactivate Bluetooth.
Description
1
2
3
4
5
6
7
8
Accessories (depending on model):
9
10
11
12
13
14
Note: Content may vary based on the model purchased.
Specifications
For voltage specifications refer to the type plates/bottom of devices.
Noise level: 68 dB (A)
Charging and Operating
Your toothbrush has a waterproof handle, is electrically safe and
designed for use in the bathroom.
• You may use your toothbrush right away or charge it briefly by
placing it on the plugged-in charger (8).
Note: In case the battery is empty (no lights illuminated on
charge level display (7) while charging or no reaction when press-
ing the on/off button (3)), charge at least for 30 minutes.
• The charge level is indicated on the charge level display (7).
Flashing lights indicate that the battery is charging (picture
once it is fully charged, the lights turn off. A full charge typically
takes 12 hours and enables at least 2 weeks of regular brushing
(twice a day, 2 minutes).
Note: At a very low charge level, the lights might not flash imme-
diately; it can take up to 30 minutes.
• If the battery is running low, a red light is flashing on the charge
level display and the motor is reducing its speed. Once the bat-
tery is empty, the motor will stop; it will need at least a 30-minute
charge for one usage.
• You can always store the handle on the plugged-in charging unit
to maintain it at full power; a battery overcharge is prevented by
device.
Note: Store handle at room temperature for optimal battery
maintenance.
Caution: Do not expose handle to temperatures higher than
50° C.

Using your toothbrush

Brushing technique
Wet brush head and apply any kind of toothpaste. To avoid splash-
ing, guide the brush head to your teeth before switching on the
handle (picture
oscillating-rotating brush heads guide the brush head slowly from
tooth to tooth, spending a few seconds on each tooth surface.
With any brush head start brushing the outsides, then the insides
and finally the chewing surfaces. Brush all four quadrants of your
mouth equally (picture
dental hygienist about the right technique for you.
In the first days of using any electric toothbrush, your gums may
bleed slightly. In general, bleeding should stop after a few days.
Should it persist after 2 weeks, please consult your dentist or dental
hygienist. If you have sensitive teeth and/or gums, Oral-B recom-
mends using the «Sensitive» mode (optional in combination with an
Oral-B «Sensitive» brush head).
Smart Ring features
Your toothbrush is equipped with a Smart Ring (2) that has various
functionalities indicated via different colors of light:
White (default) = Operating and visual timer light (choose individual
color via Oral-B
Red = Pressure sensor light
Blue = Bluetooth
Timer
You can choose between «Professional» or «2-Minute» timer.
The «2-Minute» timer signals with a long stuttering sound and a
flashing light of the Smart Ring (2) that the professionally recom-
mended 2-minute brushing time has been reached.
The «Professional» timer signals with a short stuttering sound and a
flashing light of the Smart Ring at 30-seconds intervals to move to
the next quadrant of your mouth (picture
A long stuttering sound and a flashing light indicate the end of the
professionally recommended 2-minute brushing time.
The timer memorizes the elapsed brushing time, even when the
handle is briefly switched off during brushing. The timer resets if
pausing longer than 30 seconds, briefly pressing the mode button
(4) during pause or placing the handle on the plugged-in charger.
4
91498018_D700_EE.indd 4
91498018_D700_EE.indd 4
Brush head
Smart Ring
On/off button
Brushing mode button
Handle
indicator
®
Bluetooth
Charge level display
Charger
Brush head holder
Brush head compartment with protective cover
Smartphone holder
Beauty bag
Travel case
Charger pouch
2
). When brushing your teeth with one of the Oral-B
3
App settings)
TM
pairing indicator
®
). You may also consult your dentist or
3
).
1
);
15.10.20 14:59
15.10.20 14:59

Advertisement

Table of Contents
loading

Table of Contents