Nortel Meridian Meridian 1 Release Note page 3

Csqi/csqo prompts modified in ld 17

Hide thumbs Also See for Meridian Meridian 1:

Documentation Release Note

Prompt

Response

CSQO

(20) - x

Correction

Revision in Software Input/Output: System Messages

(553-3001-411), Standard 11.00

Projected Inclusion in NTP

* Nortel Networks, the Nortel Networks logo, the Globe mark, SL-1, Meridian 1, and Succession

are trademarks of Nortel Networks.

Nortel Networks

Comment

Maximum number of call registers for CSL/AML

output queues. Where:

x = 25% of NCR

If AST is enabled, set CSQO equal to the larger value

of the following:

1. Number of ACD agents or AST sets to be

controlled by the host computer , or

2. 50.

Note: These call registers are used for Command and

Status Link applications such as Meridian Link.

Added entry: "SCH: Service Change", page 1073

SCH5553

Warning: Max of CSQI/CSQO is 25% of NCR. Increase

NCR to be able to configure greater CSQI/CSQO.

This correction will be included in the next standard release of Meridian 1 and

Succession CSE 1000 documentation.

28 August 2003

Number: MSC-0803-035

Pack/Rel

cls-7

3 of 3

Ld 17