Dishwasher Cycles And Options - Kenmore 630.1230 Series Use & Care Manual

Hide thumbs

Table of Contents

Available languages

Pots & Pans

Cleans items having baked-on or hard dried food soils.

These items may require soaking or hand scouring.

SmartWash™ HE

Takes the guesswork out of cycle selection. The sensors

in the dishwasher automatically adjust the cycle length,

temperature and water changes based on the soil load.

This cycle contains additional sensor decisions when

compared to other cycles.

Normal Wash

Thoroughly cleans normal loads having loosely attached

normal soiling.

1 Hour Wash (model dependent)

Cleans lightly soiled dishes and reduces overall wash time

to 1 hour.

Fast Wash

Cleans lightly soiled dishes and reduces overall wash time.

Use this cycle to clean glasses and dessert dishes that may

need to be re-used at the same event.

Adding options will increase or decrease the cycle time. See "Options" information section.

The cycle times listed in the Use and Care Guide are based on normal soil loads and 120°F incoming water and will vary based on

your actual conditions.

OPTIONS

Eco

Lowers temperature and cycle lengths to decrease energy

usage.

Dry Assist

Improves the drying performance by increasing the time

and temperature during the drying stage.

TurboClean™ (model dependent)

Tackles hard-to-clean dishes in the lower rack, eliminating

the need to soak and scrub heavily soiled dishes while

keeping the upper rack gentle enough for your china.

The Energy Guide label was based on the soil sensing Normal Wash cycle. All available options were turn off. The unit does not have

"Powder Dry" and therefore was not subjected to truncated testing. As prescribed in the energy test procedure the unit was tested

without any Rinse Aid (liquid) in the Rinse Aid chamber. A single dose of detergent was inserted into the Detergent Dispenser, with no

detergent being used in the prewash. The test was conducted with the upper rack in the highest position.