Service And Adjustments; Service Position; Check Engine Oil; Change Engine Oil And Filter - Gravely Pro-Turn 400 LP Operator's Manual

Table of Contents

Advertisement

SERVICE AND
ADJUSTMENTS
Gravely Dealers will provide any service which
may be required to keep your unit operating at
peak efficiency. Should engine service be
required, it can be obtained from a Gravely
Dealer or the engine manufacturer's
authorized service center.
WARNING: AVOID INJURY.
Read and understand entire
Safety section before proceeding.
CAUTION: HOT SURFACES
may result in injury. DO NOT
touch engine or drive parts which
are hot from operation. Allow
parts to cool before servicing.

SERVICE POSITION

(Figure 17)
1. Place unit on a flat level surface.
ALWAYS stop engine. Ensure unit is
secure and chock wheels. Strap and
clamp onto lift if used.
2. Place steering levers in neutral position
and engage parking brake.
3. Release the seat latch and tip seat
forward (Figure 17).
4. When service is complete, return seat to
operating position.
5. Ensure that seat latch is fully engaged
before operating unit.
CAUTION: Avoid Injury! Seat
assembly is heavy. Be sure
footing is secure to accomodate
weight shift of seat when rotating
it into service position.
Use care when returning seat to
operating position to avoid
pinching hands or fingers under
seat plate.
1. Seat Latch
2. Service Position

CHECK ENGINE OIL

Refer to Engine Manual for detailed
instructions.
CHANGE ENGINE OIL AND
FILTER
Refer to Engine Manual for detailed
instructions.
EN - 28
Figure 17
1
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

992280

Table of Contents