Treatment Of Submerged Motor - Yamaha F150D Owner's Manual

5. Unscrew the filter cup from the filter
housing. NOTICE: Be careful not to
twist the water detection switch lead
when unscrewing the filter cup.
1
1. Filter cup
2. Water detection switch lead
6. Drain the water in the filter cup by soak-
ing it up with a rag.
7. Firmly screw the filter cup onto the filter
housing. NOTICE: Be careful not to
twist the water detection switch lead
when screwing the filter cup onto the
filter housing.
8. Connect the water detection switch cou-
pler securely until a click is heard.
1
1. Water detection switch coupler
9. Fasten the water detection switch lead
with the holder.
ZMU05457
[ECM01971]
ZMU06223
[ECM01961]
2
1. Holder
10. Install the top cowling.
11. Place the remote control lever in neutral
and turn the main switch to "
Make sure that the buzzer does not
sound, or start the engine and make sure
that the water separator-alert indicator
remains off. Have a Yamaha dealer in-
spect the outboard motor after returning
to port.
EMU33502

Treatment of submerged motor

If the outboard motor is submerged, immedi-
ately take it to a Yamaha dealer. Otherwise
some corrosion may begin almost immedi-
ately. NOTICE: Do not attempt to run the
outboard motor until it has been com-
pletely inspected.
Trouble Recovery
1
[ECM00402]
ZMU05755
"(on).
89