Procedure For Tilting Up - Yamaha F150D Owner's Manual

Operation
ECM00242
NOTICE
 Before tilting the outboard motor, stop
the engine by following the procedure
on page 55. Never tilt the outboard mo-
tor while the engine is running. Severe
damage from overheating can result.
 Do not tilt up the engine by pushing the
tiller handle (if equipped) because this
could break the handle.
EMU42683

Procedure for tilting up

1. Place the remote control lever in neutral.
N
2. Press the power trim and tilt switch "
(up) until the outboard motor has tilted
up completely.
58
ZMU01771
N
ZMU07382
UP
1. Power trim and tilt switch
UP
1. Power trim and tilt switch
UP
1. Power trim and tilt switch
3. Pull the tilt support lever toward you to
"
support the engine. WARNING! After
tilting the outboard motor, be sure to
support it with the tilt support knob or
tilt support lever. Otherwise the out-
board motor could fall back down
suddenly if oil in the power trim and tilt
unit or in the power tilt unit loses pres-
1
1
1
ZMU07848
ZMU07850
ZMU07768