Figure 4-69
Note
Acceptance test certificate
Compliance with the limits, depending on the vibration severity grade ordered, is ensured in the
Siemens factories as standard. For 1PH8 motors, an acceptance test certificate with the vibration
velocities actually measured can be ordered with option B35.
4.12
Noise emission
The noise emissions of the 1PH8 depend on the type of cooling and are therefore described in
Chapter "Cooling (Page 67)."
1PH8 SIMOTICS M main motors
Configuration Manual, 12/2022, A5E51895839A
Vibration severity limit values for SH 160 to 280
Mechanical properties
4.12 Noise emission
155