Retrieve Position Information; Route Guidance; Trip Meter - Nokia N92 User Manual

To use Navigator
connected to a compatible GPS receiver. The GPS receiver
must receive position information from at least three
satellites to calculate the coordinates of your location.

Route guidance

To use route guidance, scroll to Navigation, and press
Start the route guidance outdoors. If started indoors, the
GPS receiver may not receive the necessary information
from the satellites.
Route guidance uses a rotating compass on the device
display. A red ball shows the direction to the destination,
and the approximate distance to it is shown inside the
compass ring.
Route guidance is designed to show the straightest route
and the shortest distance to the destination, measured in
a straight line. Any obstacles on the route, such as
buildings and natural obstacles, are ignored. Differences
in altitude are not taken into account when calculating
the distance. Route guidance is active only when you
move.
To set your trip destination, select
destination, and select a landmark or waypoint as the
destination, or enter the latitude and longitude
coordinates. Select
destination set for your trip.
76 Copyright © 2006 Nokia. All rights reserved.
as a navigation aid, your device must be
Options >
to clear the
Stop navigation

Retrieve position information

To view the position information of your current location,
connect your device to a compatible GPS receiver, scroll to
Position, and press
location to the accuracy of meters. An estimate of the
accuracy of the location is shown on the display.
.
To save your current location as a waypoint or landmark,
select
Options
that you can save and use in
are saved locations with more information, and they can
be used in other compatible applications and transferred
between compatible devices.

Trip meter

Scroll to Trip
Start to activate trip distance calculation, and
deactivate it. The calculated values remain on the display.
Select Reset
and maximum speeds to zero, and to start a new
calculation. Select
total time to zero.
Set
Trip meter has limited accuracy, and rounding errors may
occur. Accuracy can also be affected by availability and
quality of GPS signals.
. The GPS receiver can calculate its
> position. Waypoints are locations
Save
Navigator
distance, and press . Select
to set the trip distance and time, and average
Restart to also set the odometer and
only. Landmarks
Options >
Stop to