Settings - Nokia N92 User Manual

1
Select Options
2
If you selected
subscribed program, select the category you want to
subscribe to: Channel
Programmes.
If you selected
unsubscribed program, select from a list of
unsubscribed items.
3 Select Options
4
Select the length of the subscription.
5
To accept the subscription, select
subscription dialog.
A note is displayed when you can start watching the
channel or program.
You cannot subscribe offline or without a SIM card.
Continue and end subscriptions
1 Select Options >Subscriptions
2 Select the category:
Programmes.
3
To view the details of an item, select
details.
To continue your current subscription, select
Options >Continue
To end your continuous subscription, select
Unsubscribe.
22 Copyright © 2006 Nokia. All rights reserved.
>Subscriptions> New subscription.
Options after selecting an already
pckgs., Channels, or
Options after selecting an
> Subscribe.
Verify in the
> My subscriptions.
Channel pckgs., Channels, or
Options
subscription.

Settings

To configure the Mobile TV settings, select
Settings. Define the following:
System status—to view the general status of the Mobile
TV and the signal strength. To update the signal strength
indicator, close this dialog and open it again.
Channel order—to change the default channel order.
Select Options
move, select
Verify
and select OK.
Parental control
required password is the same as the device lock code.
After this, you must enter your lock code to view any TV
program with a higher age limit. For more information on
lock code, see "Security", p. 112.
Memory in use—to define the default location for
recordings and saved replay clips
Recording time
time reserved for program delays. With this setting you can
> Item
stop the recording later than what the given program
guide indicates.
Reminder alarm—to define how early you want to be
reminded of a program
Options >
> Mark to mark the items you want to
Options > Move, scroll to the new location,
—to set an age limit to programs. The
reserve—to define the extra recording
Options >