Technical Data - DeWalt XR D25614 Original Instructions Manual

EnGLIsh
HEAVY-DUTY ROTARY HAMMERDRILL
D25614
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
(U.K. & Ireland only)
Type
No-load speed
No-load beats per minute
Power input
Single impact energy (EPTA 05/2009)
Optimum drilling range into concrete
Maximum drilling range in concrete
Maximum core drilling range in concrete
Tool holdler
Weight
Noise values and/or vibration values (triax vector sum) according to
EN62841-2-6:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Drilling
Vibration emission value a
h, HD
Uncertainty K =
Chiselling
Vibration emission value a
h ,Cheq
Uncertainty K =
* Measured at the side handle. Side handle vibration is higher than vibration at
the main handle.
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However,
if the tool is used for different applications, with different
accessories or is poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the
total working period.
20
WALT one of the
e
D25614
V
AC
V 230/115
AC
min -1 190–380
bpm 1450–2900
W
J
mm
mm
mm
SDS MAX
kg
dB(A)
dB(A)
dB(A)
= m/s²
m/s²
= m/s²
m/s²
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
EC-Declaration of Conformity
Machinery Directive
230
1 Heavy-Duty Rotary Hammerdrill
D25614
D WALT declares that these products described under
e
1350
Technical Data are in compliance with:
2006/42/EC, EN62841-1:2015+AC:2015 +A11:2022, EN62841-2-
10.5
6:2020 +A11:2020.
16–32
These products also comply with Directive 2014/30/EU and
45
2011/65/EU. For more information, please contact D
125
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
7.8
file and makes this declaration on behalf of D
98
Markus Rompel
106
Vice-President Engineering, PTE-Europe
3
D WALT, Richard-Klinger-Straße 11,
e
65510, Idstein, Germany
30.12.2022
10.7*
DECLARATION OF CONFORMITY
1.5
THE SUPPLY OF MACHINERY (SAFETY)
9.2*
1.5
Heavy-Duty Rotary Hammerdrill
D WALT declares that these products described under
e
"technical data" are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN62841-1:2015+AC:2015 +A11:2022, EN62841-2-6:2020
+A11:2020.
These products also conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
e
REGULATIONS 2008
D25614
WALT at
e
WALT.