Table of Contents
Advertisement
5.3.3 Output Tab
The Output Tab enables amplifier outputs to be named and
provides access to further sub-menus. For all Output Tab
menus, the amplifier output under configuration is selected by
highlighting one of the output identifiers (1, 2, 3 or 4) at the top
of the display. The Output Tab also enables Speaker Preset
configurations to be created, exported, imported or cleared.
Note:: The number of individual outputs available for configuration
will depend on the UXA4403 amplifier model and the input, zone and
output mode configuration.
The Routing menu (Diagram 4f ) enables zones to be assigned
•
to amplifier outputs.
Note: Routing for zones specified as stereo will automatically offer
three output options: left channel, right channel or summed mono.
The summed mono signal can potentially be used to drive a mono
subwoofer.
The Delay menu (Diagram 4g) enables delay to be applied to
•
individual amplifier outputs.
The Equalizer menu (Diagram 4h) enables parametric
•
equalization to be applied to individual amplifier outputs.
Equalizer settings configured for one amplifier output can be
copied and applied to other outputs.
Diagram 4f
Configuration
Diagram 4g
Diagram 4h
Advertisement
Table of Contents
