Edit Vpn Access Points - Nokia E72 User Manual

VPN log — View the log for your VPN policy
•
installations, updates and synchronisations, and
other VPN connections.

Edit VPN access points

Select Menu Ctrl. panel
>
Connection > Destinations.
An access point is where your phone connects to the
network. To use e-mail and multimedia services, or to
browse web pages, you must first define internet
access points for these services. Virtual private network
(VPN) access points pair VPN policies with regular
internet access points to create secure connections.
Your service provider may preset some or all access
points for your device, and you may not be able to
create, edit, or remove them.
Select a destination and
the following:
Connection name
•
access point.
VPN policy — Select the VPN policy to combine with
•
the internet access point.
Internet access point
•
point with which to combine the VPN policy to
create secure connections for data transfer.
Proxy server address
•
address of the private network.
Proxy port number
•
number.
Use access point
•
using this access point are established
130
automatically.
Settings and
>
Options > Edit, and define
— Enter a name for the VPN
— Select the internet access
— Enter the proxy server
— Enter the proxy port
— Select whether connections
The settings available for editing may vary.
For the correct settings, contact your company's IT
department.
Use a VPN connection in an
application
You may have to prove your identity when you log on
to the enterprise network. Contact your company's IT
department for the credentials.
To use a VPN connection in an application, the
application must be associated with a VPN access point.
Tip: You can configure the application's
connection setting to
you select the VPN access point from a list of
connections when a connection is established.
1. In the application in which you want to create a VPN
connection, select a VPN access point as the access
point.
2. If you are using legacy authentication, enter your
VPN user name and passcode or password. If the
SecurID token has become out of synchronisation
with the clock of the ACE/Server, enter the next
passcode. If you are using certificate-based
authentication, you may have to enter the key store
password.
Always ask, in which case