Replacing Fuel Vent Pipe - Echo shindaiwa CS-501SX Service Manual

CS-501SX, CS-501SXH
501sx
4-5-2

Replacing fuel vent pipe

B
c2
B
FUEL SYSTEM
A
C
A
B
b
A
c1
C
1. Remove fuel tank vent (A) with pipe (B) from
rear handle assembly (C).
2. Disconnect pipe (B) from fuel tank vent (A).
Replace them if defective (Refer to "4-4 Inspecting
and replacing tank vent").
3. Connect pipe (B) to fuel tank vent (A).
4. Insert pipe (b) to hole (c1) on rear handle as-
sembly (C). Pass pipe (B) through notch (c2) on
rear handle assembly (C).
5. Reinstall crankcase assembly (Refer to "9-1
Replacing cushions"), carburetor (Refer to "4-14
Installing carburetor"), cleaner case, air fi lter and
cleaner lid.
27