Nokia 8800 User Manual page 51

S e t t i n g s
■ Call
Select Menu > Settings
• Call forwarding
not be able to forward your call if some call restrictions functions are active.
See Call restrictions
• Anykey answer
key, except the power key, the left and right selection keys, or the end key.
• Automatic redial
to connect the call after an unsuccessful call attempt.
• 1-touch dialing
1-touch dialing keys, 2 to 9. To dial, press and hold the corresponding number key.
• Call waiting > Activate
call while you have a call in progress (network service). See "Call waiting
(network service)" on page 19.
• Summary after call
cost (network service) of the call after each call.
• Send my caller ID
• Line for outgoing calls
make calls, if supported by your SIM card.
■ Phone
Select Menu > Settings
• Phone language
phone selects the language according to the information in the SIM card.
• Memory status
function in the list.
• Automatic keyguard
after a pre-set time delay when the phone is in the standby mode and no
function of the phone has been used. Select On, and you can set the time
from 5 seconds to 60 minutes.
• Security keyguard
unlock the keyguard. Enter the security code, and select On. When the keyguard
is on, calls still may be possible to the official emergency number programmed
into your device.
50
> Call and one of following options:
(network service) — to forward your incoming calls. You may
in "Security" on page 52.
> On — to answer an incoming call by briefly pressing any
> On — to set your phone to make a maximum of 10 attempts
> On and the names and phone numbers assigned to the
— to set the network to notify you of an incoming
> On — to briefly display the approximate duration and
(network service) > Yes, or
(network service) — to select the phone line 1 or 2 to
> Phone and one of the following options:
— to set the display language. If you select Automatic, the
— to view the free memory and the used memory for each
— to set the keypad of your phone to lock automatically
— to set the phone to ask for the security code when you
Set by network.