Set The Time And Date; Make A Call; Standby Mode - Nokia 7610 User Manual

• SET THE TIME AND DATE

If you are prompted to enter the time and date when you turn your phone on, use
the number keys 0–9 to key in the current time, then the date. Press OK to accept
the settings. See also "Date and time" on page 62.

• MAKE A CALL

1 In the standby mode, key in the phone number, including the area code.
2 If you make a mistake, press the Clear key to clear numbers.
3 Press the Send key, and wait for the answer.
4 Press the End key to finish the call or cancel the call attempt.

• STANDBY MODE

Indicators are shown when the phone
is ready for use, with no characters
keyed in. In this state, the phone is in
the standby mode.
The graduated bar (A) shows the
signal strength of the cellular network
at your current location. The higher
the bar, the stronger the signal. The
antenna symbol
the GPRS symbol
connection has been set to When
available and a connection is
available in the network or in the
current cell. See "GPRS" on page 61.
The area to the right of the signal bar (B) shows an analog or a digital clock.
See "Date and time" on page 62.
The area above the date (C) indicates in which cellular network the phone is
currently being used.
The graduated bar (D) shows the battery charge level. The higher the bar, the more
charge left in the battery.
The navigation bar (E) shows the currently active profile. If the selected profile is
Normal, the current date is displayed instead of the profile name.
Current shortcuts (F) are assigned to the Left and Right selection keys.
The background image (G) may be any image you select in the standby mode.
See "Themes" on page 73.
Nokia 7610 User Guide
is replaced with
when the GPRS
11
B
A
G
Getting started
C
D
E
F
Copyright © 2004 Nokia