Table of Contents
Advertisement
68
Opening and closing
& WARNING Risk of becoming trapped
despite reversing function
In particular, the reversing function will not
react:
to soft, light and thin objects, e.g. fingers
R
when you close the roller sunblind again
R
manually immediately after automatic
reversing
When closing the roller sunblind, make
#
sure that no body parts are in the range
of movement.
Release the button immediately if some‐
#
body becomes trapped.
or
Press the button in any direction during
#
the automatic closing process.
The closing process will be stopped.
Opening and closing roller sunblinds
You can close the roller sunblinds only when the
sliding sunroof is closed.
To open: press the 3 button.
#
The roller sunblinds will open, and the sliding
sunroof will then be raised into the vent posi‐
tion.
or
Pull back the 3 button.
#
The roller sunblinds will open.
To close: pull down the 3 button.
#
When the sliding sunroof is closed, the roller
sunblinds will close.
If you push or pull the 3 button beyond the
point of resistance and release it, you will start
automatic operation in the direction in question.
You can stop automatic operation by pushing or
pulling the button again.
Opening and closing roller sunblinds from the
rear
Push or pull button
#
ance and hold it until the roller sunblind or
the sliding sunroof has reached the desired
position.
Automatic operation: push or pull button
#
beyond the point of resistance and release it.
With the sliding sunroof, a complete opening or
closing process will always pass through "vent
position", a fixed intermediate position. You will
need to operate button
complete opening or closing process.
1
to the point of resist‐
1
twice to execute a
1
Advertisement
Table of Contents
