Table of Contents
Advertisement
208 MBUX multimedia system
Time and date
Setting the time and date automatically
Multimedia system:
©
System
4
5
Deactivate ª
Manual time
#
The time and date are set automatically for
the selected time zone and summer time
option.
%
The correct time is required for the following
functions:
Route guidance with time-dependent traf‐
R
fic guidance.
Calculation of expected time of arrival.
R
Setting the time zone
Requirements:
For setting the time zone manually: the
R
Automatic time zone
Multimedia system:
©
Settings
4
5
Time and date
5
Setting the time zone manually
Select
Time
zone:.
#
The list of countries is displayed.
%
If there are several time zones available in a
country, these will be shown after the coun‐
try is selected.
Select a country and, if required, a time zone.
#
The time zone set is displayed after
zone:.
Setting the time zone automatically
Activate
Automatic time
#
Setting the time and date format
Multimedia system:
©
Settings
4
5
Time and date
5
5
Set the date and time format #.
#
Setting the time and date manually
Requirements:
The
Manual time adjustment
R
switched on.
For setting the date manually: no GPS is
R
installed in the vehicle.
Time and date
5
adjustment.
function is activated.
System
5
Time
zone.
System
5
Set format
function is
Multimedia system:
©
Settings
4
5
Time and date
5
Setting the time (without time zone)
Select
Set
time.
#
Set a time.
#
Setting the time (with time zone)
Select
Set
time.
#
If a time zone is set the time is set automatically
using the time zone. The time can be adjusted by
a maximum of plus or minus 60 minutes.
Adjust the time using the slide control.
#
Setting the date
Select
Set
date.
#
Set the date.
#
%
In vehicles with GPS, a date cannot be set
even with active manual time adjustments.
The date is then set automatically through
the selected time zone.
Switching voice amplification to the rear
on/off (vehicles with a long wheelbase)
Requirements:
R
Your vehicle is equipped with the Burmester
surround sound system or the Burmester
high-end 3D surround sound system.
The ignition is switched on.
R
Doors, side windows and the panoramic slid‐
R
ing sunroof are closed.
At least one seat belt is engaged on the rear
R
bench seat.
Multimedia system:
©
Settings
4
5
Voice amplification
5
The function supports communication between
the driver/co-driver and the passengers in the
rear compartment. When voice amplification to
the rear is activated, the microphone signals are,
depending upon vehicle noise levels, amplified
and played back over the speakers in the rear
compartment. Amplification is automatically
adjusted to speaker volume and ambient noise, in
order to improve speech intelligibility and main‐
tain the naturalness of speech.
Activate or deactivate the function.
#
System
5
®
®
System
Audio
5
5
Advertisement
Table of Contents
