Nokia 7210 User Manual page 81

3 Write down your interaction with the recorded prompts step-by-step.
Keep in mind that each voicemail service may vary. However, it should
look something like this:
Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press
1234, press pound key.
Important: Be precise, you'll need this information in "Setup
voicemail with dialing codes" later in this section.
a
LEARN HOW TO INSERT DIALING CODES
Press repeatedly to cycle through dialing codes. Once the desired code
appears in the display, pause briefly and the code is inserted into the
dialing string.
For example, press
briefly and the wait character is inserted into the dialing string. Available
dialing codes are as follows:
Dialing codes
*
Bypasses a set of instructions
+ Precedes an international telephone number
p Pauses for 2.5 seconds before sending any numbers that follow
w Wait. Your phone waits for you to press
numbers or codes that follow.
Setup voicemail with dialing codes
1 At the Start screen, press Names, scroll to 1-touch dialing, and
press Select.
2 Scroll to an empty 1-touch dialing slot and press Assign.
3 Enter your voice mailbox number, including the area code.
4 Refer to the table entitled "dialing codes," and enter any codes as
necessary using the information that you wrote down earlier.
For example, if you pause for 5 seconds after connecting to voicemail,
a
four times to display the "w" (wait character). Pause
[ 72 ]
t
before it sends any