Automate Voicemail - Nokia 7210 User Manual

Tip: Save yourself the trouble of entering the mailbox codes each
time you dial voicemail. See "Automate voicemail" later in this
section for more information.
Call and setup your voicemail
1 Once you've saved the voice mailbox number, press and hold
2 When you connect to voicemail and the pre-recorded greeting begins,
follow the service's automated instructions to setup your voicemail.
Listen to your voice messages
Once you've setup voicemail, you can dial the number in one of 4 ways:
• Dial the number using the keypad
• Press and hold
• Press Listen if there's a notification message in the display
• Press Menu 01-4-1 (Messages - Voice messages - Listen to
voice messages). After a brief pause, your phone dials the
voicemail number.
Once you connect and the pre-recorded greeting begins, follow the
automated instructions to listen to your voice messages.

• AUTOMATE VOICEMAIL

You can insert special characters called "dialing codes" into phone numbers
such as voicemail and then save the number to a 1-touch dialing location.
Dialing codes instruct the receiving system to pause, wait, bypass, or
accept the numbers that follow them in the dialing string.
Note: Each voicemail service can vary. The examples and steps
that follow are for clarification. Check with your wireless provider
if you have specific questions about your voicemail service.
Write down some information
1 Write down your voice mailbox number.
2 Call and check your voicemail as you normally would.
1
[ 71 ]
Menu functions
1
.