Product Specifications; Tools Required For Installation - Pentair OMNIFILTER EASY FLOW Instruction Manual

Under counter water filtration system
Table of Contents

Advertisement

Thank you for your purchase. The Pentair® Easy Flow Under
Counter Water Filtration System makes getting the water you
want easier than ever. It effectively reduces contaminants so you
can enjoy peace of mind with every refreshing sip, straight from
your existing faucet. And you can install it yourself in minutes.

PRODUCT SPECIFICATIONS

Temperature Range:
Min.-Max. Working Pressure: 40-125 psi (2.75 - 8.62 bar)
Service Flow Rate @ 60 psi: Up to 2.2 gpm* (8.33 Lpm)
Rated Service Life:
Dimensions (w/o hoses):
Connection Type:
Weight:
*Not Performance Tested or Certified by NSF
See Performance Data on page 6 for further performance and
specification information and at www.nsf.org.

TOOLS REQUIRED FOR INSTALLATION

• #1 size Phillips screwdriver (supplied)
• Two wrenches (supplied)
• Flashlight or light source (optional)
• Towel or shallow tray (optional)
• Note: Typical installation of the Easy Flow takes
15 minutes or less.
2 • PENTAIR OMNIFILTER UNDER COUNTER WATER FILTRATION SYSTEM • INSTALLATION AND OPERATING INSTRUCTIONS
40 - 100°F (4.4 - 37.8°C)
3000 gallons (11356 liters)
14.86" (H) x 4.8" (D)
377.44 mm (H) x 101.09 mm (D)
3/8" (.375 mm) compression
3.3 lbs (1.5 kg)
PRECAUTIONS
WARNING:
Do not use with water that is microbiologically
unsafe or of unknown quality without adequate
disinfection before or after the system. Systems
certified for cyst reduction may be used on
disinfected waters that may contain filterable
cysts.
WARNING:
Check for compliance with state and local laws
and regulations.
CAUTION:
Filter must be protected against freezing, which can
cause cracking of the filter and water leakage.
NOTE:
• For cold water use only.
• The system must be maintained according to
manufacturer' s recommendations, including replacement
of filter. The contaminants or other substances removed or
reduced by this water treatment device are not necessarily
in your water. Ask your local water municipality for a copy of
their water analysis or have your water tested by a reputable
water-testing lab.
• After prolonged periods of non-use (such as during a
vacation), it is recommended that the system be flushed
thoroughly. Let the water run for a minimum of fifteen (15)
minutes before use.
• The filter used with this system has a limited service life.
Changes in taste, odor or flow may indicate that the filter
should be replaced.

Advertisement

Table of Contents
loading

Table of Contents