Table of Contents
Advertisement
8.1. Choosing the Installation Location
- When installing, use the nearest power socket. Make sure the
power socket is easy to reach so you can quickly disconnect your
air conditioner in case of emergency.
- Ensure that the air conditioner is well supported, securely
fastened, easily reachable and not obstructed (see "Dimensions"
below).
- Avoid locations with: salty or sulphurous air, draughts, dampness
and flammable gas.
- If you install the drainage system, be sure to channel the
condensed water to a suitable location.
- Covers, obstructions and unsteady support may cause excessive
operating noise and vibration.
- The rear end of the air conditioner is splash proof. You need not
shield or cover it.
8.2. Preparations Before Installation
8.2.1. Dimension
- There should not be any obstacles surrounding the unit.
- Prepare an installation hole slightly bigger than the cabinet size.
- Left and right sides of the unit should be at least 15 cm away from
the wall.
8.3. Installation Procedures
Advertisement
Table of Contents
