Automatic Redial; Call Waiting; Summary After Call; Send My Caller Identity - Nokia 3200 User Manual

Automatic redial

Occasionally, your network may experience heavy traffic, resulting in a "fast" busy
signal when you dial. With automatic redial activated, your phone redials the
number up to 10 times, and notifies you once the network is available.
From the menus, select Settings > Call settings > Automatic redial > On or Off.
1 touch dialing
-
You can turn the 1-touch dialing feature on and off. For more information, see
"1-touch dialing" on page 54.
From the menus, select Settings > Call settings > 1-touch dialing > On or Off.

Call waiting

If supported by your service provider, call waiting notifies you of an incoming call
even while you are in a call. You can then accept, reject, or ignore the incoming call.
ACTIVATE OR DEACTIVATE CALL WAITING
From the menus, select Settings > Call settings > Call waiting > Activate or Cancel.
USE CALL WAITING
1 During a call, press the Talk key to answer the waiting call.
The first call is put on hold.
2 Press the End key to end the active call.

Summary after call

You can display the time spent on a call when you hang up.
From the menus, select Settings > Call settings > Summary after call > On or Off.

Send my caller identity

You can prevent your number from being displayed on the receiving party's caller
ID. This feature is network-dependent and works on a call-by-call basis. Contact
your service provider for more information.
From the menus, select Settings > Call settings > Send my caller ID > Set by
network, Yes, or No.
A message appears in the display confirming your selection.
Select a line for outgoing calls
Note: This is a network-dependent feature. Check with your service provider
for availability and a description of the feature.
1 From the menus, select Settings > Call settings > Line for outgoing calls.
Nokia 3200 User Guide
67
Settings (Menu 4)
Copyright © 2004 Nokia