Write And Send A Text Message; Read Messages - Nokia 3200 User Manual

From the menus, select Messages > Message settings > Multimedia msgs. >
Connection settings > Edit active multimedia settings; then select each of the
following in turn and enter the settings provided by the service provider.
Settings' name—Rename the setting to your preference.
Homepage—Enter the homepage where your browser retrieves multimedia messages
and select OK.
Session mode—Select session mode Temporary or Permanent.
Data bearer—Select the data bearer (always GPRS).
Bearer settings—Set each of the following settings for the data bearer:
• GPRS access point—Enter the access point name and select OK.
• IP address—Enter or change the IP address and select OK.
• Authentication type—Select either Normal or Secure.
• User name—Edit or enter your user name and select OK.
• Password—Edit or enter a password and select OK.
Receive multimedia connection settings
You may be able to receive multimedia connection settings as a text message from
your service provider. For more information, contact your service provider.

• WRITE AND SEND A TEXT MESSAGE

1 From the menus, select Messages > Text messages > Create message.
OR
Press the Scroll left key at the start screen.
2 Compose a message using the keypad and select Options > Send.
3 Enter the recipient's phone number, or select Find to retrieve a number from
contacts, and select OK.
Your message is sent.
When sending messages, your device may display the words Message sent. This is
an indication that the message has been sent by your device to the message center
number programmed into your device. This is not an indication that the message
has been received at the intended destination. For more details about messaging
services, check with your service provider.

• READ MESSAGES

Receive a message
When you receive a text or picture message or e-mail,
appears in the display, where n is the number of new messages.
36
n Message(s) received
Copyright © 2004 Nokia