Wireless 5GHz/802.11a or
2.4GHz/802.11g
•
Setting WEP encryption through the
Web-based Browser Utility is done by
clicking the WEP Key Setting button
on the Setup Screen of the Access
Point.
•
From the pull-down menu select the
type of WEP encryption you wish to
use.
•
The Passphrase option can be used
with the 802.11g WEP encryption, it
can be a maximum of 16 alphanumeric
characters.
•
For 802.11a you will need to enter the
key manually.
Note: Always remember that each point in your wireless network MUST use the same WEP
Encryption method and encryption key or your wireless network will not function properly.
© 2003 Cisco Systems, Inc. All Rights Reserved.
Device Configuration using Web Utility
Slide 41
Model No:WAP55AG