Philips SmartPro FC8700/01 Service Manual
Compact robot vacuum cleaner
Hide thumbs
Also See for SmartPro FC8700/01:
- Manual (126 pages) ,
- Manual (74 pages) ,
- Service manual (14 pages)
Advertisement
Quick Links
Philips Consumer Lifestyle
Service Manual
PRODUCT INFORMATION
• This product meets the requirements regarding
interference suppression on radio and TV.
• After the product has been repaired, it should function
properly and has to meet the safety requirements as
officially laid down at this moment.
TECHNICAL INFORMATION
• Colour
• Battery type
• Battery voltage
• Charging time
• Runtime
Usability
• Threshold climbing
• 24-hour scheduling
• Infrared sensors
• Types of Floors
• Smart detection system
Published by Philips Consumer Lifestyle
15/10 Version 1.5
SmartPro Compact Robot vacuum cleaner
: Deep Black & Basic
Blue
: Li-Ion
: 12.8 V
: 6 hour(s)
: 80 min.
: 13 mm
: Hardfloor
: 12 sensors
Printed in the Netherlands
Nozzles and accessories
• Exhaust filter, AC power adaptor, Side brushes (2 pairs)
Dimensions & weight
• Dimensions
• Product weight
with packaging
Accessories included
• Docking station
OPTIONAL (accessories)
• No specific issues
© Copyright reserved
FC8700/01
FC8700/71
: 60.1 x 330 mm
: 1.53 kg
: 2.9 kg
Subject to modification
Advertisement
Related Manuals for Philips SmartPro FC8700/01
Summary of Contents for Philips SmartPro FC8700/01
- Page 1 : 13 mm • 24-hour scheduling • Infrared sensors • Types of Floors : Hardfloor • Smart detection system : 12 sensors Published by Philips Consumer Lifestyle Printed in the Netherlands © Copyright reserved Subject to modification 15/10 Version 1.5...
- Page 2 DISASSEMBLY- AND RE-ASSEMBLY ADVISE FC8700/01 / FC8700/71 • First make sure that the appliance is unplugged. • Turn the appliance upside down . • To empty and/or replace the Dustbin assy, the Top Cover • The brushes can easily be pulled out and replaced, after has to be removed (see picture).
-
Page 3: Repair Instruction
REPAIR INSTRUCTION FC8700/01 / FC8700/71 IR Sensors calibration for replacing PCBA After calibration the robot need to be tested for the drop- down sensors: This can be done on a table. If the robot Purpose: IR Sensors have to be calibrated if replacing does not fall from the table the calibration was done in a PCBA. - Page 4 REPAIR INSTRUCTION FC8700/01 / FC8700/71 Wiring diagarm Battery socket, Left brush, Left big wheel, Red, black Green Orange and brown and blue and black M500-IR, Rear IR, Right brush, Right big wheel, Orange, black Purple Blue and Black and and blue and black black brown...
-
Page 5: Parts List
PARTS LIST FC8700/01 / FC8700/71 Service code Description Remark 4322 006 67901 Suction motor assy A 4322 006 22901 Recharable battery 1300 mAh - 12.8 V Super Li-Ion 4322 006 09961 Switching adaptor 24 V - 1000 mA Euro plug 4322 006 08901 Switching adaptor 24 V - 1000 mA AU/NZ plug... - Page 6 EXPLODED VIEW FC8700/01 / FC8700/71 6-16...
- Page 7 EXPLODED VIEW FC8700/01 / FC8700/71 7-16...
- Page 8 EXPLODED VIEW FC8700/01 / FC8700/71 8-16...
- Page 9 EXPLODED VIEW FC8700/01 / FC8700/71 9-16...
- Page 10 EXPLODED VIEW FC8700/01 / FC8700/71 10-16...
- Page 11 EXPLODED VIEW FC8700/01 / FC8700/71 11-16...
- Page 12 EXPLODED VIEW FC8700/01 / FC8700/71 12-16...
- Page 13 EXPLODED VIEW FC8700/01 / FC8700/71 13-16...
- Page 14 EXPLODED VIEW FC8700/01 / FC8700/71 14-16...
- Page 15 EXPLODED VIEW FC8700/01 / FC8700/71 15-16...
- Page 16 FC8700/01 / FC8700/71 Version history Version 1.1 : FC8700/01 initial release. Version 1.2 : Added new version: FC8700/71. In Parts List and Exploded view: Added Pos. 3: 4322 006 08901 Switching adaptor 24 V - 1000 mA AU/NZ plug. Version 1.3 : In Parts List at Pos. 9, changed 4322 004 94151 into 4322 004 94152. Version 1.4 : In Parts List at Pos.