Toro Multi-Pro 5700 Installation

Covered Boom Kit
Multi-Pro
Model No. 41602—Serial No. 313000001 and Up
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
Important: Air induction Flat Fan nozzles (AIC TeeJet) are recommended for use with the covered boom kit to
avoid chemical buildup on the covers during application. Refer to Toro's nozzle chart for details.
Note: The Spring Upgrade Kit, Part No. 120-8508 should
be installed with the Covered Boom.
© 2012—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
® 5700/5800 Turf Sprayer with Truss-Style Boom
Description
Center boom bracket
Boom mount plate
U-nut
Hex head screw, 3/8 x 1-1/4 inch
Model/serial number decal
Regulatory decal (119-4986)
Flange nut (3/8 inch)
Washer plate
Hex head screw, 5/16 x 1-1/4 inch
Wing boom cover
Washer plate
U-nut
Hex head screw, 5/16 x 1-1/4 inch
Drain valve mount bracket
Carriage screw (3/8 x 1-1/4 inch)
Flange nut (5/16 inch)
No parts required
Register at www.Toro.com.
Form No. 3375-338 Rev A
Qty.
2
2
4
2
Install the center boom brackets and
1
cover.
1
2
2
4
2
16
Install the wing boom covers.
12
12
1
2 Install the drain valve mount bracket.
2
Check that the boom covers have proper
–
clearance.
Original Instructions (EN) All Rights Reserved *3375-338* A
Printed in the USA
Operator's Manual
Use