ADTRAN DSU III TDM Manual page 74

Chapter 5. Configuration Overview
volatile configuration) memory. The DSU III TDM is then configured with
that profile every time power is turned on or until the unit is reset.
The DTE R
the same on both units for correct operation. For this reason, any
change to these options on the local unit automatically updates
the remote unit and these options do not appear in the remote
configuration menus.
For detailed information on configuration see the chapters, Configuring
Network Options on page 6-1, Configuring DTE Options on page 7-1, Configur-
ing Test Options on page 8-1, Configuring Dial Options on page 9-1, and Man-
ual Command on page 10-1.
A complete C
ONFIGURATION
5-2
and D
ATE ATA
menu is shown in the enclosed insert.
DSU III TDM User Manual
F options must be configured
ORMAT
61200063L1-20