Maintenance And Servicing; Cleaning, Maintenance, And Lubrication - Central Machinery 63366 Owner's Manual & Safety Instructions

Maintenance and Servicing

procedures not specifically explained in this manual must
be performed only by a qualified technician.
tO prEVEnt SEriOuS inJury FrOM acciDEntaL OpEratiOn:
unplug the tool from its electrical outlet before performing any procedure in this section.
tO prEVEnt SEriOuS inJury FrOM tOOL FaiLurE:
Do not use damaged equipment. if abnormal noise or vibration
occurs, have the problem corrected before further use.

cleaning, Maintenance, and Lubrication

1. BEFOrE EacH uSE, inspect the general
condition of the Log Splitter. Check for:
• loose hardware
• misalignment or binding of moving parts
• cracked or broken parts
• damaged electrical wiring
• leaking hydraulic fluid
(Do not check for leaks during operation.)
• any other condition that may
affect its safe operation.
Page 10 For technical questions, please call 1-888-866-5797.
2. aFtEr uSE, wipe external surfaces of
the tool with clean cloth to remove any
tree sap, dirt or hydraulic fluid.
3. Periodically as needed, use a fine-toothed file
to smooth out any burrs, nicks or crushed areas
and sharpen the cutting edge of the Wedge.
4. WarninG! tO prEVEnt SEriOuS
inJury: if the supply cord of this power
tool is damaged, it must be replaced only
by a qualified service technician.
Item 63366