2006 by Harbor Freight Tools ® . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions, please call 1-800-444-3353.
Distractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed. SKU 93815 PRODUCT SPECIFICATIONS 2 HP , 110 V , 60 Hz, Single Phase, 1150 W atts 14 AW G x 3C, Double Insulated 8.1 w ith no load...
Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. SKU 93815 ELECTRICAL SAFETY PERSONAL SAFETY...
Page 4
Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the splitter’s operation. If damaged, have the splitter serviced before using. Many accidents are caused by poorly maintained tools. SKU 93815 TOOL USE AND CARE PAGE 4...
Hydraulic systems. Never operate this tool if there is a hazard presented by hydraulic fluid. Before using the Log Splitter, check for hydraulic leaks. Be sure the tool and your work area are clean and free of oil spills. Hydraulic fluid can create hazards, causing you to slip and fall, your hands to slip while using the machine, or fire hazard.
Page 6
(California Health & Safety Code § 25249.5, et seq.) WARNING! People with pacemakers should consult their physician(s) before using this product. Operation of electrical equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker. SKU 93815 PAGE 6...
The plug and outlet should look like those in the following illustration. (See Figure A.) Note: The Log Splitter has a 3-prong electrical plug. FIGURE A SKU 93815 GROUNDING WARNING! PAGE 7...
(See Figure C.) If you are using one extension cord for more than one tool, add the nameplate amperes and use the sum to determine the required minimum cord size. (See Figure C.) SKU 93815 FIGURE B EXTENSION CORDS PAGE 8...
Page 9
7.1 – 12.0 12.1 – 16.0 16.1 – 20.0 * Based on limiting the line voltage drop FIGURE C to five volts at 150% of the rated amperes. SKU 93815 (120 VOLT) EXTENSION CORD LENGTH Feet Feet SYMBOLOGY Double Insulated...
Page 10
When unpacking, check to make sure all the parts shown on the Parts List on page 14 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
Be sure to avoid wet conditions. Check level of hydraulic oil. Before first use, and before each subsequent use, check to make sure the Log Splitter is filled with hydraulic oil (see “Checking/ Changing Hydraulic Oil” section on page 12).
3.2 quarts of oil. Then tilt the machine to empty oil into the container. 4. Tilt the Log Splitter the other way, with the Oil Fill / Drain Port up. Using a clean funnel, pour in 3.2 quarts of Hydraulic Oil.
ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SKU 93815 HOW TO FREE A JAMMED LOG PAGE 13...
NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 93815 ASSEMBLY DIAGRAM PAGE 15...
LIMITED 90 DAY WARRANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of ninety days from the date of purchase.