To Subject Or Select A Wider Aperture - Nikon SB-25 Instruction Manual

Confirm Settings
7 Set aperture in use.
For instruction, see "Setting Aperture Value (Manual
Adjustment)," pages 28 to 29.
Shooting indicator bars in the LCD panel move as the
figure input changes.
Determine approximate flash-shooting distance range by
reading indicator bars.
Quick reference on relationship between usable
apertures and flash shooting distance
Use table on page 142 in this instruction manual.
78
8 Look into camera viewfinder, compose and lightly
press the shutter release button.
Confirm ready-light has come on and subject is in focus.
Check if ready-light is on in camera's viewfinder or on the
SB-25 .
TTL Auto Flash
Firing Flash
9 Fully depress the shutter release button to fire flash.
10 Recheck ready-light to see if it is blinking.
If ready-light blinks for a few seconds after shooting, flash
has fired at its maximum output but the light may have been
insufficient.
Reconfirm shooting distance and, if necessary, move closer
to subject or select a wider aperture (in aperture-priority
auto or manual exposure mode) to compensate underexpo-
sure.
Chapter
Mode: For FA, FE2, FG and Nikonos V Users
3
79