Table of Contents
Advertisement
Installation
Installing the hardware and software
Step 17. Push the Core I/O or HSC Expansion I/O card firmly back into place.
Step 18. Push down firmly on the extractor levers on both ends of the card, to
secure it in place.
Step 19. Screw the two slot screws back into place.
Step 20. Repeat the above process if you have additional cards to be installed.
Step 21. Power on the system.
Step 22. Continue with the section titled, "Loading the software driver and tools"
at the end of this chapter.
32
Chapter 3
Advertisement
Table of Contents
