Enhance; Scene Mode Scheduler - Bosch FLEXIDOME panoramic 5100i User Manual

28 en | Configuration
Intensity level region 1 to 5
(Only applicable to FLEXIDOME panoramic 5100i IR)
The device has 5 controllable IR zones. You can individually control the intensity of the IR
LEDs. To do so, adjust the sliders from 0 to +30.
Region 1 is always in the center. Regions 2, 3, 4, and 5 are outer parts of the visible scene.
If the lens is rotated mechanically, it will be positioned differently in relation to the IR LEDs. If
adjusted correctly, regions 2, 3, 4, and 5 shown in the image match the IR zones from the
camera.
4.4.8

Enhance

High dynamic range
The High dynamic range is available when the High Dynamic Range (HDR) mode is set in the
Sensor mode in the Installer Menu. Set the High Dynamic Range mode to:
–
–
–
–
Backlight compensation
–
–
Contrast enhancement
The slider adjusts the contrast enhancement level between 0 and +15.
Sharpness level
The slider adjusts the sharpness level between -15 and +15. The zero position of the slider
corresponds to the factory default level.
A low (negative) value makes the picture less sharp. Increasing sharpness brings out more
detail. Extra sharpness can enhance the details of license plates, facial features and the edges
of certain surfaces but will increase bandwidth requirements.
Temporal noise filtering
Adjusts the Temporal noise filtering level between -15 and +15. The higher the value, the
more noise filtering.
Spatial noise filtering
Adjusts the Spatial noise filtering level between -15 and +15. The higher the value, the more
noise filtering.
4.4.9

Scene mode scheduler

The scene mode scheduler is used to determine which scene mode should be used during the
day and which scene mode should be used during the night.
1.
2.
3.
To set the Marked range as the single mode of the device, select the complete time range.
The text "Always" will appear after the Marked range menu.
Click Set to apply the changes.
2022-10 | V03 | F.01U.385.628
Off - The device is in single exposure mode and the user does not have an increased
dynamic range through the multi-exposure HDR.
Auto - The device automatically goes to multi-exposure when an improved dynamic range
is necessary. The device switches between single and multi-exposure when necessary.
Optimized DR - This option allows the device to optimize high dynamic range scenes.
Extreme DR - The effects on the dynamic range with this function is more extreme, which
can give more visibility, but could potentially cause visual noise or artefacts.
Select Off to switch off backlight compensation.
Select On to capture details in high-contrast and extremely bright-dark conditions.
Select the mode you wish to use during the day from Marked range drop-down box.
Select the mode you wish to use during the night from Unmarked range drop-down box.
Use the two slider buttons to set the Time ranges.
User manual
FLEXIDOME panoramic 5100i | FLEXIDOME
panoramic 5100i IR
Bosch Security Systems B.V.