Advertisement
Quick Links
Advertisement
Related Manuals for Haier HPH60ILX2
Summary of Contents for Haier HPH60ILX2
- Page 1 BUILT-IN INTEGRATED RANGEHOOD HPH60ILX2, HPH60ILB2 HPH90ILX2, HPH90ILB2 NZ AU...
-
Page 2: Table Of Contents
CONTENTS Safety and warnings Installation instructions Operating instructions Cleaning and maintenance Parts and accessories Service & Warranty... -
Page 3: Safety And Warnings
The appliance is heavy. Please ensure adequate care is taken when installing the appliance to prevent personal injury. The appliance must be installed onto a solid wall, stud, beam or truss. Weight of the product is 6.5 kg (HPH60ILX2, HPH60ILB2) / 8.8 kg (HPH90ILX2, HPH90ILB2). 6.5 kg (HPH60) 8.8 kg... - Page 4 SAFETY AND WARNINGS Before connecting any pipes, consult municipal ordinances to ensure that any ● applicable regulations concerning the discharge of exhaust air are adhered to and request permission from the person in charge of the building. Exhaust air must not be discharged into an existing flue that is used for exhausting ●...
-
Page 5: Installation Instructions
INSTALLATION INSTRUCTIONS Parts Supplied BUILT-IN INT EGRATED RANGEHOOD HPH60ILX2, HPH60ILB2 HPH90ILX2, HPH90ILB2 NZ AU Rangehood 150 mm ducting adapter User guide with non return flap Other Parts Required Ducting – 150mm diameter, rigid or semi-rigid (not supplied) - Page 6 INSTALLATION INSTRUCTIONS Product and cabinetry cutout dimensions...
- Page 7 INSTALLATION INSTRUCTIONS HPH60ILX2, HPH90ILX2, HPH60ILB2 HPH90ILB2 PRODUCT DIMENSIONS Overall height of product (with ducting adapter) (338) (372) Overall width of product Overall depth of product Thickness of flange Width of chassis Depth of chassis Height of side of chassis Width of top surface of chassis...
- Page 8 INSTALLATION INSTRUCTIONS Height of rangehood MINIMUM CLEARANCES Height top of cooktop to base of product min. 600 – max. recommended 750 This rangehood must be installed no lower than the minimum height indicated in the table above. Minimum installation height may be greater if required by the cooktop manufacturer or safety and warnings section on this user guide.
- Page 9 INSTALLATION INSTRUCTIONS Induction cooking considerations Induction cooktops use energy efficient technology that only heats the contents of a ● cooking pot. Unlike gas or traditional electric cooktops, the surrounding air does not get heated ● when using an induction cooktop. As a result, rangehood filters, splashbacks and surrounding cabinetry do not get warmed up, increasing the likelihood of condensation on these cooler surfaces.
- Page 10 INSTALLATION INSTRUCTIONS Recirculating Where ducting outside is not a practical option, this rangehood can be installed to operate with the air recirculating. Carbon filters are required to remove odours from the air before it is channelled back into the room or overhead bulkhead (refer to ‘Cleaning and Mainte- nance’...
- Page 11 INSTALLATION INSTRUCTIONS INSTALLATION 1 Prepare for installation. Before installing your rangehood: Please read the instructions carefully. ● Unpack the rangehood and check that all functions are working. ● Ensure that the voltage (V) and the frequency (Hz) indicated on the serial plate ●...
- Page 12 INSTALLATION INSTRUCTIONS 5 Connect duct and plug rangehood in. 6 Lift the rangehood and fit through the opening of the cupboard till the spring loaded brackets / clips hold the product in place. 7 Secure rangehood while tightening the brackets / clips...
-
Page 13: Operating Instructions
OPERATING INSTRUCTIONS Control panel CONTROL PANEL FEATURES Lights Turn the lights on or off. Turn the rangehood fan off. Turn the rangehood fan on or adjust the fan speed levels from 1 – 3 with 1 being the lowest level and 3 Fan speed 1 - 3 being the highest. -
Page 14: Cleaning And Maintenance
CLEANING AND MAINTENANCE WARNING! Unplug or disconnect the appliance from the power supply before servicing ● or cleaning. IMPORTANT! Never use abrasive or oil based cleaners. ● Wear gloves to protect against sharp edges. ● Maintenance The rangehood should be cleaned regularly using a mild, liquid detergent and a clean soft cloth to avoid a build-up of grease occurring. - Page 15 Refit aluminium grease filters. Light bulb replacement To replace the lights you must contact your Haier trained and supported service technician. Refer to the haier website or your service and warranty book for contact details. Note: lights are not user replaceable.
-
Page 16: Parts And Accessories
PARTS AND ACCESSORIES ITEM REFERENCE NUMBER Aluminium filter (HPH60ILX2, HPH60ILB2) 793597 Aluminium filter (HPH90ILX2, HPH90ILB2) 793598 Recirculation carbon filter x2 792481... -
Page 17: Service & Warranty
You must produce both warranty card and proof of purchase in the event of a warranty repair being required. When you purchase any new Haier Product you automatically receive a two year Manufacturer’s Warranty covering parts and labour for servicing. - Page 18 SERVICE & WARRANTY G Pick up and delivery. H Transportation or travelling costs involved in the repair when the product is installed outside the AUTHORISED CUSTOMER SERVICE CENTRE’S normal service area. This product has been designed for use in a normal domestic environment. It is not intended for commercial use.
- Page 19 Product Detials Model ______________________ Serial Number: __________________ Date of Purchase Purchaser Dealer ______________________ Suburb______________________ Town______________________ Country______________________ Thank you for choosing Haier. We are confident that you will enjoy many years of good service from your appliance.
- Page 20 The product specifications in this document apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement, these specifications may change at any time. You should therefore check with your Dealer to ensure this document correctly describes the product currently available.