Black & Decker PW1450TD Original Instructions Manual page 27

pattern and slowly adjust to the desired spray pattern. This
will help you avoid applying too much concentrated spray
to the surface which could cause damage.
3. Final Rinse
Start final rinse at bottom and work upward. Make sure
you thoroughly rinse the surface and that all detergent has
been removed.
4. Shut down
f Be sure all detergent is flushed from system.
f Turn off motor .
f Turn off water supply.
f After motor and water supply are turned off, trigger
gun to depressurize system.
CAUTION! NEVER turn water supply off before turning
motor off. Serious damage could occur to the pump and/
or motor.
WARNING! NEVER disconnect high pressure discharge
hose from machine while system is pressurized. To
depressurize, turn motor off, turn water supply off and
squeeze gun trigger 2-3 times.
f After each use, wipe all surfaces of the pressure
washer with a clean, damp cloth.
6. Storage
Do not store pressure washer outdoors.Do not store
pressure washer where it might freeze.
PRESSURE WASHER TIPS FOR EXTENDING
THE LIFE OF YOUR MACHINE
f Never operate unit without water.
f Pressure washer is not meant to pump hot water.
Never connect to hot water supply – this will
significantly reduce life of the pump.
f Using detergent other than others brand may cause
damage to pump components (o-rings, etc.).This also
applies to chemicals such as bleach, dish soap, etc.
f Never operate unit for more than one (1) minute
without spraying water.
f Resulting heat buildup will damage pump.
f Before adjusting nozzle's pressure (high-to-low or
low-to-high) release trigger. Failure to do so will
reduce life of o-rings in lance.
SELF- PRIMING FUNCTION
Hose kit NOT INCLUDED
1
2 3
2
4
INSPECTION & MAINTENANCE
For safety use, make sure a three-month clean the
machine. Before working, make sure inspect the filter and
the nozzle, make sure there is no impurity. After working,
make sure there is no water in the pump and the hose. If
the machine need to be repaired in the guarantee period,
please return the machine to the shop. You need to
provide the certificate of purchase in order to repair or get
the substitute.
Before Packaging, The machine should be cleaned, then
use closed packaging, packaging should be firm. Storage
the machine in dry.
For transportation safety. The machine should comply with
ISTA.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your
BLACK+DECKER product needs replacement,
or if it is of no further use to you, do not dispose
of it with household waste. Make this product
available for separate collection.
Separate collection of used products and
packaging allows materials to be recycled and
used again. Re-use of recycled materials helps
prevent environmental pollution and reduces the
demand for raw materials. Local regulations may
provide for separate collection of electrical products
from the household, at municipal waste sites or by
the retailer when you purchase a new product.
SERVICE INFORMATION
BLACK+DECKER offers a full network of company-owned
and authorized service locations. All BLACK+DECKER
Service Centers are staffed with trained personnel to
ENGLISH • 27
3