Advertisement
Discover Access Points
The wireless controller manages selected NETGEAR access points.
For a list of supported NETGEAR access points, visit the NETGEAR
support site.
Before attempting to discover access points, familiarize yourself with
the access point LEDs:
LED
Description
Power
The green Power LED blinks when the access point is first
powered on and then lights solid green. If after 30 seconds
the Power LED is off or is still blinking, check the connections
and check to see if the power outlet is controlled by a wall
switch that is turned off.
Active
The Active LED blinks when the access point detects
network traffic.
LAN
Green. 1000 Mbps connection speed.
Amber. 10/100 Mbps connection speed.
Off. No link detected.
12
Advertisement
