Table of Contents
Advertisement
Target ID Legend
Target ID Legend—Works in conjunction with the Target ID
Cursor to indicate a target's probable identity. Ferrous (iron)
targets will indicate on the left half, non-ferrous targets that
are thin or have low conductivity will indicate in the middle,
and thick or high conductivity targets (e.g. thick copper) will
indicate at the right.
Target ID Cursor (Upper Scale)—The Target ID cursor, in
conjunction with the Target ID Legend, indicates the probable
identity of a detected target. The upper scale consists of
twenty (20) graphic segments for Target ID.
Lower Scale—The lower scale, or Notch Discrimination
Scale, continually indicates the discrimination pattern. The
CSI Pro will produce an audible target response for the pixels
that are switched on, and no audible response for those
that have been switched off. The Target ID Cursor will always
indicate all targets.
Depth Indicator—The depth of a .38 caliber bullet, or
similar sized target, is indicated in 2" (5cm) increments. Note:
targets larger than a .38 caliber bullet may display shallower
than actual depth while targets smaller than a .38 caliber
bullet may display deeper than actual depth.
12 Garrett Metal Detectors
TARGET INFORmATION
Target ID Cursor
(Upper Scale)
Discrimination
Pattern
(Lower Scale)
Depth
Indicator
Advertisement
Table of Contents
