Table of Contents
Advertisement
8-4 Administration Guide
removing a circuit without losing the configured attributes.
In order to function, each circuit must be bound to a Connection Profile or to the Default Profile. Among
other attributes, the profile binding specifies the IP addressing information for use on the circuit. Each
circuit must be bound to a distinct Connection Profile. You cannot bind multiple circuits to the same
Connection Profile.
You configure Virtual Circuits in the Add/Change Circuit screen. From the Main Menu, navigate to the DSL Line
Configuration screen.
Main
Menu
Circuit Type...
Signaling Mode...
Cell Format...
Unused Cell Format...
Data Link Encapsulation...
RFC1483 Mode...
PPP over Ethernet (PPPoE):
Display/Change Circuit...
Add Circuit...
Delete Circuit...
Return/Enter goes to new screen.
Select Display/Change Circuit and press Return.
WAN
Configuration
ADSL Line Configuration
WAN
Setup
Auto-detect
FDM
Scrambled
Idle
RFC1483
Bridged 1483
Off
DSL Line
Configuration
Advertisement
Table of Contents
